This article is continuing in the series on exploring Hyperscala. If you have not already done so, I would highly recommend reading the following previous posts as many topics discussed here build on concepts previously discussed:

• Hyperscala: An Introduction
• Hyperscala: Getting Started
• Hyperscala: Chat Example

The Play Framework is perhaps the most popular web framework among Scala developers today. I have been asked quite a few times what is wrong with Play that made me decide against using it and instead write my own web framework. To be fair, Play is a pretty awesome framework and is a great choice for web applications. However, there are a few problems I have with it that led me to choose against using it moving forward:

Templating Language

Though Play does a far better job of this than pretty much anyone else I've seen, you're still dealing with special syntax in your HTML templates for accessing your Scala code. This is incredibly problematic when there is a separation of designer and programmer. Life becomes quickly more difficult when the programmer injects all the Play-specific code into the HTML file that came from the designer and then the designer needs to make a change. Not only does it become difficult for the designer to even preview what the content should look like now, but it is highly likely that the designer will mess something up when they are trying to make changes to the HTML. This was something I spent a lot of time considering and trying to come up with a better solution for in Hyperscala. I have worked at a lot of large companies that have teams of designers and teams of developers and it is incredibly painful bridging that gap. In Hyperscala there are actually several solutions to this problem, but the best one for this specific scenario, I believe, is DynamicContent. We've discussed this in a previous post and demonstrated it in yet another post. The idea is keeping the HTML clean and pure and the developer simply loads in only what they need to manipulate by the HTML 'id'. In my opinion, this is the simplest solution and a much cleaner separation between the designer and the developer.

Modularity

Yes, there is module support in Play, but it is confusing at best and extremely limited at worst. There is an inherent problem in any framework that doesn't have complete control over the HTML and Play simply does not. The way Play works is very similar to JSPs where content is injected but the HTML is never parsed or comprehended. This leads to several problems when you have modules that need to introduce something like jQuery but shouldn't load it multiple times and want to avoid an issue where another module is trying to load a different version. These are complicated issues that need to be dealt with in large web applications. In Hyperscala the Module system is incredibly powerful and solves all of these problems incredibly well. Not only that, but a Module in Hyperscala is dead simple to write and even more simple to use.

Complicated Setup

Any framework that needs its own console in order to create an application is too complicated. Yes, I agree that it's cool that the Play framework has its handy-dandy console utility to create your application for you, setup your IDE, and probably even brush your teeth for you. However, I very much dislike "magic" that happens and is unexplained. I prefer to understand what is going on under the hood and though you can do this in Play, the decision was made as a default route to hide this from the developer. I prefer to work with frameworks in which you add a Maven dependency and then start writing some code. I don't want configuration files. I don't want a bunch of boilerplate code that is generated on my behalf. I want to instantiate something and run it. This is exactly what Hyperscala does. Once you include your Maven dependencies for Hyperscala you need only create an implementation of Website and add a Webpage to be up and running. In Play you have a minimum expectation of an Application.scala, index.scala.html, application.conf, and routes file.

In an effort to compare Hyperscala with Play practically I decided to take an example from Play and re-write it in Hyperscala. My hope was for a simple 'Hello World' example to keep it simple and straight-forward, but what Play considers their 'Hello World' example is quite a bit more than that. It will have to do.

First lets take a look at the Application.scala file:

This is fairly simple. The idea is that this page asks you for your name to display, the number of times to repeat it, and a color. When you hit submit, it validates the form (based on the validations specified near the top of the page) and then either displays errors or writes out the name you specified the number of times you specified in the color you specified. Notice here that the form validation process is hard-coded, so no special handling is necessary. I point this out now because in Hyperscala there is no "default" for how validation should be handled so it takes a little more code (but not much).

Next we take a look at the HTML files defined for the display.

hello.scala.html index.scala.html main.scala.html

It's fairly clean and I'm sure once you get used to the Play syntax it becomes easier to grasp. However, this would be quite difficult for a designer to work with. I'm sure there is a better way to represent the page for designers, but then you obviously lose out on much of the power of Play.

Now lets take a look at how this same functionality would look in Hyperscala. Like I've said several times now, there are many ways to accomplish the same task in Hyperscala and this is just one way.

First lets look at the HTML, since this is what we really should start developing from. We can focus on getting the design exactly how we want it before we even think about Hyperscala:

play_hello_world.html

This is our basic HTML for the page. Notice there is absolutely nothing specific to Hyperscala or non-HTML in the file at all.

play_hello_world_configuration.html

I've extracted the 'configure' page out into this snippet because we're not only going to replicate Play's Hello World example, but we're going to leverage the Realtime module of Hyperscala to avoid doing a POST and thus keep you on the same page for the entire experience. I could have replicated the form posting utilizing FormSupport mixin, but hopefully this will work as a good example of how easy real-time communication is in Hyperscala. Again, notice that there's nothing special about this HTML. It can easily be previewed in the browser and edited by a designer.

Now, lets take a look at our Scala code:

PlayHelloWorldPage.scala PlayHelloWorldConfiguration

Not much to see that hasn't already been explained in past examples but there are a few things of note. First, notice the call to Realtime.connectStandard(). This, as the scaladocs says, connects all inputs, textareas, and selects to fire change events and buttons to fire click events to the server. We can do this manually, but this saves us a few lines of code. The other thing of note here is the adding of validation. The 'addValidation' method is received as an implicit conversion on FormFields (input, textarea, and select) by importing org.hyperscala.ui.validation._. We utilize some built-in validations and use the ClassValidationsHandler to apply the error class to the outer container and set the message to the error container when validation fails on a field. Like I said before, how validation works in Hyperscala is not built-in, it's part of the UI sub-project and defines some convenience functionality of how error might be handled, but opens the door to supporting validation errors any way you see fit.

In conclusion, I would argue that while in this example the lines of code may be equivalent, the benefits should be seen particularly for larger applications and for interaction with designers. I do not want this to come off as me bashing Play Framework. I have nothing but respect for the framework and the developers that created and use it. My purpose in this post is merely to compare and contrast the architectural choices in one framework against another and to hopefully better explain why I believe Hyperscala to be a better framework in many situations.

Source code referenced for the Play Hello World example came from Play samples on github:

• https://github.com/playframework/Play20/tree/master/samples/scala/helloworld

Source code referenced for the Hyperscala comparison came from Hyperscala examples on github:

• https://github.com/darkfrog26/hyperscala/blob/master/examples/src/main/scala/org/hyperscala/examples/comparison/PlayHelloWorldPage.scala
• https://github.com/darkfrog26/hyperscala/blob/master/examples/src/main/resources/play_hello_world.html
• https://github.com/darkfrog26/hyperscala/blob/master/examples/src/main/resources/play_hello_world_configuration.html

Up to this point we've talked about the high-level features of Hyperscala and have gone through a simple Hello World example, but today we're going to write a real application to show a fairly simple real-world web application.

The real-world application we're going to write today is a chat example. This will utilize real-time messaging, cross-session interaction, abstraction from the user-interface through DynamicContent, and much more.

We will be building upon concepts we've already discussed in the past two posts, so if you haven't already read them I would recommend doing that first. I'm going to skip over the project setup and even the website configuration and focus solely on the webpage for the chat in this post.

The first thing we need to do is to create our webpage class and for the purposes of this tutorial we'll call it ChatExample. As we can remember from previous discussion the basic setup for a webpage simply requires extending from org.hyperscala.web.site.Webpage:

Pretty simple so far. Next we are going to leverage existing HTML for the user-interface rather than writing it all in Hyperscala. This is generally the preferred route when you have a disconnect from the designer and the developer and allows for a very clean separation of duties.

The first HTML file is chat.html. It defines the form and layout of the page:

This should be put in the src/main/resources path in your project. Now, DynamicContent requires the HTML to be presented to it as a String, so we need to load and cache that HTML file:

That will load in the HTML file and store it as a String for usage in each page instance. Now lets create a DynamicContent instance in our page to load that HTML for usage and add it to the body of the page:

Now that we have the DynamicContent loaded we can extract any HTML elements we want to modify or listen to:

If you look back at the HTML file you'll see that the Strings being supplied reference the HTML elements by id for lookup and loading. After these elements are loaded we can then modify them or even introspect the existing data from the HTML. Technically we could just load the entire HTML file and parse it as a Hyperscala structure, but that would be a waste of resources and add unnecessary complexity. By using DynamicContent we can reference only the things we care about in existing HTML and the design can change over time without any necessity of the Scala code changing (so long as those elements remain of the same type and id).

Next we need to add some real-time support to these elements so we can listen for changes and clicks:

The require call is necessary to make sure we have support for Realtime messaging. This is a Module that provides two-way communication between the server and client preferring WebSockets and falling back to long-polling AJAX. The other three lines simply connect JavaScriptEvent to the client-side corresponding JavaScript events. This will intercept client-side events of the specified type and fire them on the server as well. Note that this is simply making that occur, we now need to actually listen for the changes we're interested in:

The above code listens for changes to chatName and updates the internal nickname. This will allow you to distinguish between who is messaging. Second, we add a ClickEvent listener to the submit button to send the message. Now lets see the body of these methods:

This method is rather simple. It calls off to our companion object calling its sendMessage method passing your nickname and the message you typed. Next it clears the value of the TextArea. Finally, it uses jQuery to request focus back to the TextArea. We'll cover the ChatExample.sendMessage method in a minute.

First we add a nickname property to our page instance so we can reference the currently accepted nickname for this user. The updateNickname method first checks to see if the chatName has anything entered. If it doesn't then it assigns the name 'guest'. Next it calls off to ChatExample.generateNick with the nickname to verify that an existing nickname isn't already present. Finally, we assign the chatName input's value to be the newly assigned nickname.

Now we need a HTML representation of each chat entry:

We need to load the HTML again, so we add another val representing the HTML as a String in our companion object below Main:

Now we create a custom class representing an individual chat entry:

We can simply instantiate this and add it to our messages div for each message. Notice that this is very similar to our previous use of DynamicContent except this time we are extending it instead of simply instantiating it. Also, notice the use of reId = true during load of the name and body divs. This is necessary when using an item multiple times on a page as you'll end up with duplicate HTML ids in the code if you don't. When we specify reId = true that will simply assign a new unique id to the element at the time it loads it so each time it will be different.

Lets look at the rest of the content of our companion object now:

There's quite a lot going on in the above code although hopefully the majority is fairly easily understood. First we see we're keeping a history of all the messages so when a new person joins they get to see what's already been said. The instances method gives us a peek into the powerful session framework to look up all of the ChatExample pages across all sessions on the site. The generateNick method takes the supplied nickname and checks to see if it's already in use. If it is then it will add an increment to the end until an available nickname is found. Finally, sendMessage broadcasts the message to all pages adding a ChatEntry in their context. It is necessary to mention context at this point. For many of the underlying features of Hyperscala events and other information are localized to a page so in order to invoke changes across multiple pages we must work within that pages' context. As you can see it is incredibly easy to contextualize to the page by simply calling the context method and passing a function to be invoked within the context.

We have covered a very broad scope of functionality in this post but hopefully it was all clear and understandable. The end result should look like this:

All of the source referenced in this tutorial can be found in the GitHub repository:

• ChatExample.scala
• chat.html
• chat_entry.html

Last week I did an introduction to Hyperscala and briefly outlined some really cool things it can do. This week I want to slow down a bit and take you through the basics of getting your first application up and running with Hyperscala.

Requirements: Since there is a broad number of IDEs / editors used for working in Scala I won't make any presumptions in this tutorial regarding an IDE. However, I will quickly say that I use IntelliJ and absolutely love it for Scala development. That being said, the only requirements necessary to begin this tutorial is SBT and your editor of choice.

First we need to create our directory structure:

hello-hyperscala/
src/
main/
scala/
hello/
HelloPage.scala
HelloSite.scala
build.sbt

Now lets create our build.sbt file in the hello-hyperscala folder with the following contents:

This is a fairly simplistic build.sbt file with just a few specifics to note. First, we need the Typesafe Repository because one of Hyperscala's dependencies uses Akka Actors. The external repo will not be required once we upgrade to 2.10 but because of some known bugs in 2.10 that undertaking is currently on hold. The second thing to notice is the hyperscala-web dependency. The web sub-project of Hyperscala provides the functionality to create a Website and Webpages. There are several sub-projects in Hyperscala (core, html, javascript, svg, web, ui, examples, and site) but web is the highest level we need and depends on the rest of the functionality we want to use right now.

Next we need to create our actual webpage:

You'll name this HelloPage.scala and put in the hello directory as reflected in the structure above. It's fairly simple what we're doing here. We're extending from Webpage that defines the basic HTML structure (html, head, body) and we can then add content on to it. We set the page title and add "Hello World!" to the body of the page.

Next we need to create a Website. The website is responsible for routing URLs to pages, managing access to the session, and much more. So here's our very basic website:

You'll name this HelloSite.scala and put it in the hello directory with HelloPage.scala. We simply define the val page that represents the URI /hello.html to point to a new HelloPage. The second argument is a function, so every request creates a new instance of HelloPage. We talked about Scope in the previous article but for the purposes of our do-nothing page we just have it create the page, render it, and then die when a request comes in. By default a WebpageResource will automatically add itself to the Website so there's no need to explicitly add it. Lastly, the createSession is responsible for creating a new Session that is used throughout the website across all pages.

Now that we've got all of our code written we simply need to run it. Issue the following command:

You should end up with some output like the following:

Notice the "bound to *:8080" signifies that it is wildcard bound to all IP addresses and on the port of 8080. Now just open up your browser and hit http://localhost:8080/hello.html and you should be greeted with "Hello World!".

It has been well over a year since my last post. In 2011 I went to work for Overstock and moved to Utah. Life got busy and I worked during the day and when I had time I programmed on Sgine at night (http://www.sgine.org).  In February of 2012 I left Overstock and moved back to Oklahoma to start my own company writing software for businesses around the world (http://www.outr.com).  Life got busier. :)  Now, here it is, 2013 and I've resolved to blog at least once a week on the many amazing things I get to do.

Today I want to introduce you to Hyperscala (https://github.com/darkfrog26/hyperscala).  It's a web framework I've been working on for a few months in Scala to provide type-safe HTML, CSS, SVG, and JavaScript to developers.  The first question out of my mouth when I hear another person talking about another web framework is, "Why another web framework?" and I've asked myself that question many times both before creating and since creating it. Each time I come up with the same answer, and one that by the end of this introduction I hope you all will agree: It was necessary.

First, as any good introduction should, I'll show you a little Hello World example:

Obviously this is a very simplistic example and simply sets the page title and adds a String to the body of the page. If you'd like a far more detailed example of the bare-metal type-safe HTML writing capabilities I would recommend looking at the TodoMVC example.

This is all well and good if there are no designers and you prefer working in Scala to HTML and CSS. Unfortunately, this is not always the case and the goal of Hyperscala is not to make presumptions on how it will be used, so we try to accommodate everyone.

So, what do you do when you have existing HTML that needs to be brought into your project?

The first option is to convert it into Scala using the handy-dandy code conversion utility in Hyperscala. The code in the TodoMVC above was generated using this neat little tool. This works great when you have a snippet or large amount of HTML that needs to be converted into code to work with. For more information about this tool take a look HTMLToScala.scala. You can run the main method to get a nice visual file selector and tell it where to output the resulting Scala source file. This route works great until you need a designer to make a change to your HTML and they are unwilling to edit your Scala source files. ;)

This brings us to the second option. This is sort of a hybrid approach and I believe really gives you the best of both worlds in the case that you have externally maintained HTML and CSS that needs dynamic content integration. I created the DynamicContent trait and utilization of this trait allows you to dynamically import HTML and load only the elements you want to work with. See the following HTML snippet:

In this example we care about the two inputs and the button but we don't care about the rest of the content. So, utilizing DynamicContent we create SimpleDynamicForm:

This is a bit more elaborate than is necessary, but shows some of the power of PowerScala Properties in the mix with Hyperscala. Look specifically at the line where the button is loaded:

DynamicContent finds the button by its id in the dynamic.html file and loads it as a Hyperscala tag.Button and any changes I make to the loaded button are reflected at render time. I could have simply loaded the name and age inputs as well, but using bind I cross-bind the value of the input to their reflected field names in the Person class. This means that when I change the value of the inputs it updates the 'person' Property to reflect the change. DynamicContent.bind introduces two other features of Hyperscala we need to briefly discuss: Modules and Realtime.

Modules provide the ability to define shared functionality between applications, components, features, etc. For example, a big problem in web site development is avoiding multiple includes of jQuery. In Hyperscala there is a built-in module for jQuery that any tag or page that needs to make use of can simply 'require' in their code. For example:

The above code requires jQuery be present by referencing the jQuery Interface and passing a default implementation of jQuery182. This will inject jQuery182 if no other implementation of jQuery is specifically provided before render of the page. The require method may be invoked with just an Interface (and an exception will be thrown at render time if no implementation has been provided), an Interface and a default Module (as seen above), or just a Module (at render time the module will be used if it is the highest version number provided for the same module name).

Modules are extremely easy to write. For example, the jQuery182 module looks like this:

Every Module needs a name and version. If they implement an Interface they can override the implements method to provide a list of those they implement (see we are implementing jQuery interface). The init method is invoked the very first time the module is used within a Website. This allows one-time actions to be taken like registering a JavaScript resource to a path as seen above. The load method is invoked at first render of every page that requires this module. This gives the module the ability to interact with the page prior to rendering to the client. As you can see in the jQuery182 module we simply add a tag.Script instance to the head of the page.

Realtime is actually a Module like we just discussed, but an extremely powerful one. This allows two-way communication between the client and server via WebSockets falling back to AJAX polling. It is incredibly easy to use as seen below:

That's all that's necessary in order to allow cross-communication to a loaded webpage. Now any changes to the HTML after page load will automatically synchronize to the browser. Further, you can begin listening to JavaScript events on the server by specifying what events you want to be sent down. For example:

This is an extremely simple example of hooking up a button that sends click events to the server. Notice on line 12 the use of "event.click". All HTML tags expose JavaScript events via the "event" object. In this case we are assigning the result of calling JavaScriptEvent() that interacts with Realtime to send the event down to the server. We could do something like this instead if we wanted just basic JavaScript:

Notice on line 14 we add a synchronous listener to handle a ClickEvent (the JavaScript event that is thrown when clicked). When clicked we simply log that the button has been clicked to the server-side console.

This has been a pretty long post, but barely scratches the surface of what Hyperscala can do. My goal is to spend the next few weeks blogging about the features and capabilities of Hyperscala and get into some even more powerful features of the framework. Again, the biggest advantage of Hyperscala is that at its core it is simply a webpage rendering framework. Everything else is just icing on the cake. This means anyone that has other needs for the features of Hyperscala can simply build their own abstraction layer on top to provide whatever they want.